ISB NB1.20.0260.202-1PPN thrust ball bearings

bore type:Straight; manufacturer upc number:029176033094; closure type:Open; d:100 mm; B:34 mm; cage material:Pressed Steel; D:180 mm; internal clearance:C3; number of rows:1;

radial static load capacity:238288 lb; D:3.9375 in; harmonization code:8483.30.8070; closure type:Sealed; outer ring material:52110 Bearing Steel; ball material:52100 Steel; bearing type:Radial; misalignment angle:14 °; inner ring width:2.3180 in; weight:4.43 lbs;

D:1-1/2 in; bearing material:Oil-Impregnated Bron; maximum p value:Static 8000 / D; overall length:1 in; d:1-1/4 in; maximum pv value:50000; maximum v value:1200 (sfm); standards met:SAE 841, CT-1000-K26; material specification:Oilite®, Synthet; groove/plug type:None;

D:400mm; Fatigue Load Rating (kN):196; SKU:22244cck/c4w33-skf; Seals or Shields:Open Type; d:220mm; Dynamic Load Rating (kN):1760; Clearance:C4; Reference Speed Rating (r/min):1500; Static Load Rating (kN):2360; Availability:In Stock;

bore type:Round; fillet radius:1.5 mm; static load capacity:49 kN; B:25 mm; precision rating:Not Rated; outer ring width:25 mm; maximum rpm:5300 RPM; finish/coating:Uncoated; D:130 mm; dynamic load capacity:68.9 kN;

length to ball center:1.9380 in; lubrication type:With Lubrication Fit; shank thread length:1.2190 in; manufacturer catalog number:1500601000; shank thread size:3/8-24 in; thread direction:Left Hand; rod end type:Male Threaded; axial static load capacity:400 lb; head diameter:1.0000 in; misalig

SKU:22217-e1a-k-m-c3-qbl; B:36mm; d:85mm; Availability:In Stock; D:150mm; Clearance:C3; Seals or Shields:Open Type; Cage Type:Brass; Weight:0.02 KGS;

manufacturer upc number:053893883182; series:NP; d:170 mm; cone width:53.975 mm; finish/coating:Uncoated; bearing material:Steel; inner ring width:53.975 mm;

d:1.6875 in; series:S-2000; bore type:Round; seal type:Triple Lip; lubrication type:Lubrication Fitting; base width:2.38 in; overall length:7.8750 in; mounting:Two-Bolt Base; base to bore centerline:2.1250 in; maximum rpm:2460 RPM;

d1:45 mm; Lock nut:KM 10; Locking device:MB 10; d3:70 mm; lock nut number:KM10; material / coating:Steel; Hydraulic nut:HMV 10E; d:45 mm; Mass adapter sleeve assembly:0.28 kg; d:50 mm;

slot spacing:2.2500 in; d:1.0000 in; housing material:Cast Iron; dynamic load capacity:4410 lbf; series:UKT200+HE2000; seal type:Contact with Slinger; lubrication type:Lubrication Fitting; slot width:0.4688 in; overall length:4-29/64 in; locking device:Adapter Sleeve;

lubrication type:Lubrication Fitting; D:6.5000 to 7.0000 in; replacement bearing:2-23 HTC; base width:2.3750 in; bolt size:.6250 in; base to bore centerline:2.4375 in; series:NPL; overall height:4.9375 in; overall length:8.6250 in; operating temperature range:Max 400°;

Basic dynamic load rating C:30.7 kN; Calculation factor f0:14; B:42.8 mm; Recommended tightening torque for grub screw:16.5 N·m; d2:56.5 mm; Thread grub screw G2:3/8-24 UNF; d1 ≈:51.8 mm; r1,2 min.:1 mm; C:21 mm; B1:56.3 mm;

overall height:92.1 mm; unit type:Side Mount; overall length:100 mm; manufacturer catalog number:127540; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; seal type:Triple Lip with Flin; series:205; d:1.0000 in; dynamic load capacity:3146 lb;